Courses - LCSC Catalog

Electronics Technician (GENEL)

A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z

Course Descriptions - Lewis-Clark State College 2002-2003 Catalog

GENEL 114 - Basic Electronics (6 cr.)

The student will be able to analyze: basic AC and DC circuits using safety topics, Ohms law and other network theorems, electrical concepts for resistors, capacitors and inductors used in both an AC or DC mode; power supply and solid-state device theory. The student will understand the relationships of capacitors, coils, and resistors in AC and DC circuits. The student will gain an understanding of the theory for diodes and transistors operated as switches. Laboratory experiences include the use of digital multimeters, power supplies, function generators, oscilloscopes, frequency counters, and work done on electronic training simulator.

GENEL 117 - Introduction to Digital Electronics (6 cr.)

This course prepares students to comprehend and apply the fundamentals of digital electronic circuits for advanced electronic programs. Because the circuits covered in this course are found on board microprocessor IC's, students will better understand microprocessor operations. These circuits are found in micro-computer support systems as Large and Very Large Scale Integrated circuits (LSI/VLSI); they are also found as Small and Medium Scale integrated circuits in such diverse applications as computer equipment, consumer products, digital test equipment, scientific apparatus, industrial electronic systems and all modern communications systems. Important products of this course include decision-making, topic resourcing, technical writing, and hands-on experiences. Pre-requisites: GENEL 114 and GENEL 152 or equivalent courses.

GENEL 118 - Electronic Equipment Installations (2 cr.)

This course will instruct students on how to install cabling, as well as proper methods needed to install hardware. There are many different conductor cables, including power, signal, r-f, digital data lines, series and parallel ports, some of copper, others such as fiber optics, which require training to fit, splice or terminate. Wire wrap, crimping, and soldering skill will be part of the curriculum. The hardware installation includes drilling, mounting, using pop rivets, simple use of sheet metal brake, and a large assortment of fasteners commonly used in industry.

GENEL 120 - Introduction to Micro Computers for Electronic Technicians (3 cr.)

This course will provide students with the background knowledge and experiences to program a microcomputer from the operating system to an application. Students will also be able to perform basic system upgrade and operational maintenance.

GENEL 132 - C++ for Electronic Technicians (4 cr.)

This course provides students entering the electronics industry with the programming fundamentals needed to develop and troubleshoot software for developmental systems. Pre-requisite: GENEL 120.

GENEL 136 - Solid-State Electronics (6 cr.)

This course is will cover solid state topics that start with diodes, diode configurations, circuits, and uses, and then a thorough coverage of thyristers, and bipolar transistors. This includes make-up and different configurations, such as transistor biasing, and CE, CB, and CC, gain, phase inversion, input and output impedance, as well as determining Beta, Alpha, and other parameters. Load line graphing will be stressed, and maximum peak-to-peak and power dissipation of the transistor approximations calculated. Other topics include Class A, B and C operation, multistage amplifiers, power amplifiers, and Darlington pairs. JFETS and MOSFETS and electronic oscillators will be covered The products of this course will include lab experiment write-ups, circuit building, product and performance assessment, as well as sound troubleshooting. Data sheets and use of catalogs will be taught.

GENEL 152 - Applied Math I & II (3 cr.)

Covers use of powers of ten, scientific notation, and the S.I. System of measurement when dealing with electrical quantities. Apply basic fundamentals of algebra to solve problems in Ohm's Law, Kirchhoff's Law, series circuits, power factor, and efficiency. Factor monomials from polynomials and evaluate algebraic expressions. Solve equations obtaining algebraic fractions and apply them to problems of ratio, percent, and electrical conductors, problems of voltage and current division in series and parallel circuits, and systems of linear equations. Pre-requisite: Basic Algebra

GENEL 225 - Computer Interconnectivity

(4 cr.)

The purpose of this course is to train electronic technicians how to connect microcomputers to peripherals, control systems, and basic networks. Students will be required to apply their training from previous courses in software, hardware, and digital electronics. Additional training in computer firmware is covered. Included in this course is the development of advanced troubleshooting skills and critical thinking.

GENEL 226 - Introduction to Micro Controllers (4 cr.)

This course provides students entering the electronics industry with the fundamentals of micro-controllers needed to develop and troubleshoot software for micro-controllers. Pre-requisite: GENEL 117.

GENEL 228 - CET Exam Study (2 cr.)

ISCET Certified Electronic Technician Exam preparation. May be self-study or class format. Targets study for Associate Level Exam. Study materials also available for any of the Journeyman Level options.

GENEL 229 - PLC Troubleshooting (2 cr.)

The purpose of this course is to train electronic technicians how to connect and troubleshoot Programmable Logic Controllers. Students will be required to apply their previous training from software, hardware, and digital electronics courses. Included in this course is the development of advanced troubleshooting skills and critical thinking. Pre-requisites GENEL 226, GENEL 132, GENEL 117

GENEL 240 - Fiber Optics (2 cr.)

The purpose of this course is to train electronic technicians how to connect, restore, and test fiber optic cables and equipment. It is recommended but not required that the student have some previous experience in electronic systems.

GENEL 245 - Advanced Analog (4 cr.)

This course prepares students to comprehend and apply the fundamentals of solid-state electronics for advanced electronic circuits. These circuits are found in applications as computer equipment, consumer products, digital test equipment, scientific apparatus, industrial electronic systems and all modern communications systems. Important products of this course include decision-making, use of equipment manuals and the Internet, and hands-on experiences. Pre-requisites: GENEL 136.